Double pathways AAO

By removing the barrier layer of the single-pass AAO , a double-pathways AAO  can be obtained. The single-pass AAO  is a surface-colored opaque sample due to the support of the aluminum substrate, while the general double-pathways AAO  is translucent. Below are AAO Double pathways membranes of different sizes.

The color of the double-pathways  is mainly related to electrolyte composition, electrolytic voltage or current density, and electrolysis time. The crystalline state of the double-pathways film has a large relationship with the electrolytic current density. At a very large current density, such as 2000-4000 A/m2, the formed film can be converted into a crystal.

The strength of the double-pathways AAO  depends on the porosity and the thickness of the . Generally, the lower the void ratio, the higher the strength; the thickness of the  increases and the strength increases.

The front and back sides of the double-pathways AAO  generally have a better positive order than the reverse side. During the packaging process, the sample is facing up, and when the sample box is opened, the upward side is front.

The hole arrangement and order of the double-pathways AAO  are the same as the single-pass AAO  product except for the special specification sample (such as the unique surface topography design or the unique cross-sectional structure design). It should be noted that for different pore size ranges, such as less than 50 nm and greater than 100 nm, different electrolytes are required, and the arrangement of the pores and their order are not the same.

Double pathways AAO

Note: The above specifications have two specifications: φ12mm and φ15mm. The default is pure film without support ring. If you need support ring, you can contact customer service to customize.

AAO double pass filter (Φ13mm/25mm / 47mm)

Description: AAOfilter is a series without support ring, the pure film size is calibrated; AAOdisc is a series with support ring, the calibration size is Φ25mm, the effective size of the film is Φ21mm; the calibration size is 47mm, the effective size of the film is Φ43mm, other sizes can be customized.

Microscopic nanostructures:

Contact us:

If you have any question, please contact us.

Email:mxenes@163.com

Tel/Wechat:+86-18101240246（ technician ）17611215338（salesman）

QQ:2820939878

Skype: simon541142052

Whasapp: +86 18101263250