Graphene conductive coating

product description

Nano-composite graphene heat-dissipating coating is an emerging energy-saving nano-coating. Paint is an energy-saving paint that reduces the infrared band at the same temperature of the object and increases the frequency of infrared radiation. The paint has been reviewed and tested by coating experts and academicians for a long time. It is unanimously approved that the paint radiation, cooling, heat dissipation, and absorbing have good effects, and the heat exchange rate can be increased by more than 30%.
The nano-composite graphene heat-dissipating and cooling coating is a coating which radiates heat of the object or accelerates heat conduction in the form of graphene nano material. The temperature resistance is 20---180 ° C, and the coating is directly applied to heat-dissipate or accelerate. On the surface of the heat-conducting object, the coating automatically radiates heat to the atmospheric space or the internal space of the object with an emissivity of about >0.92ε and an infrared wavelength band, which accelerates heat exchange, reduces the surface temperature of the object and internal temperature, or accelerates the external heat. Conducting inside the object to increase the heat exchange rate.
A: The paint is applied to the object to accelerate the heat dissipation to the space where the object is located and reduce the temperature of the object.
Second: If the ambient temperature is high, the paint is applied to the surface of the object to accelerate the heat transfer of the ambient heat to the object and increase the heat absorption rate of the object.
The coating is a super-heat-dissipating nano-material. Graphene is mixed into the coating in proportion to improve heat exchange, and the heat dissipation is not affected by the surrounding medium. The coating not only has good absorbing and cooling effect, but also has good absorbing property, electrical conductivity and corrosion resistance. It is resistant to acid and alkali and convenient for construction.

Note: This nano-composite graphene coating is a water-based environmentally friendly coating. It is non-viscous and can be fully stirred before use.
Graphene conductive coating:
Product parameters
Name: Graphene Carbon Nanotube Waterborne Super Conductive Coating
Coating appearance: black liquid, no odor
Coating surface resistivity: 3-20 Ω/cm (sheet resistance), adjustable resistance
Construction method: manual brushing, roller coating, spraying
Painting thickness: 20um
Drying conditions of the paint: 85 ° C, drying for 30 minutes, can be dried, dried for 2 hours, dried for 12 hours, (recommended)
Other features: weather resistant, seawater resistant
-------
Name: Graphene Carbon Nanotube Waterborne Conductive Coating
Coating appearance: black liquid, no odor
Coating surface resistivity: >20Ω/cm (sheet resistance), adjustable resistance
Construction method: manual brushing, roller coating, spraying
Painting thickness: 20um
Drying conditions of the paint: 85 ° C, drying for 30 minutes, can be dried, dried for 2 hours, dried for 12 hours, (recommended)
Other features: weather resistant, seawater resistant
--------
Name: Graphene carbon nanotube high temperature water-based heat dissipation coating
Appearance: black, no smell
Temperature resistance: 150-300 degrees
Baking temperature: 180 degrees
Baking time: 30 minutes (if the thickness is thicker, it can be extended)
Application areas: open high temperature heat dissipation, ceramic heater heat dissipation, industrial heat dissipation, etc.
-----
Name: Graphene carbon nanotube water-based heat dissipation coating
Appearance: black, no smell
Temperature resistance: 30-150 degrees
Baking temperature: 85 degrees
Baking time: 30 minutes, can be dried, dried for 2h, solid 12h, (recommended)
(If the thickness is thicker, it can be extended)

Application areas: open low-temperature heat dissipation, mobile phones, electronic products, power amplifiers, LEDs, etc.

施工事项

1.清除涂抹物体表面的灰尘和污；

2.使用前应将涂料搅拌均匀，搅拌过程中涂料的粘度会有所下降并迅速稳定，搅拌 1 分钟 即可；

3.涂刷方式：可采用刷涂、抹涂、滚涂、浸涂、灌涂或喷涂方式施工。喷涂时喷枪的口径要大于1毫米 以上，涂料喷出不要产生严重雾化现象，以免击碎颜料失去涂料辐射降温性。

4.固化方式：推荐在100度下固化20分钟。也可常温固化，不须加热固化，涂刷时要在通风的环境 中。涂刷基体或设备最佳表面温度是0--60℃。

Application field

Graphene heat-dissipating coatings have high radiation cooling properties, are easy to use, can be applied in thin layers, or can be applied in thick layers. The coatings also have excellent protection and decorative functions.
1. Objects that need to cool down and cool down, can be painted on objects that need heat to dissipate heat, CPU, LED lamps, electrical appliances, cabinets, wires and cables, radiators, fan fans, heat pipes, textiles, tanks, industrial equipment, buildings, Water tanks, vehicles, etc.
2. Where heat exchange is needed, heat exchange can be accelerated on vacuum furnaces, vacuum radiators, vacuum pipes, vacuum dryers, heat exchangers, objects with small conduction area, and small convection space.

Radiation heat-dissipating paint can be applied to the material of the object

The graphene coating has excellent adhesion and is easy to apply and can be used on almost any clean, dry surface. Paint can be applied in steel, cast iron, zinc, aluminum, copper, stainless steel, magnesium, stone, wood, cement, brick, ceramic, glass, textile, plastic, paper plexiglass, asbestos, all kinds of fiberboard, rubber board, Surfaces such as asphalt, foam (sponge), polyurethane, polypropylene coating. In order to ensure the adhesion of the coating, the surface of the object should be properly pretreated if necessary.
Brushing accelerates heat dissipation on objects with low conductivity. It can be applied to plastics, rubber, PVC, ceramics, cement, cloth, leather, paper, glass, wood, etc. to accelerate the heat dissipation of objects.
The paint can also be applied to objects that require heat dissipation and need waterproof insulation, such as metal, fiber, etc., which need to be waterproof and insulated while cooling and cooling.

Graphene heat dissipation coating for LED lamp cooling example
"radiation cooling and cooling coatings" LED lighting applications are the most widely used, can reduce the temperature of 30-45%.

Notice:

If you have any question, please contact us.

Email:mxenes@163.com

Tel/Wechat:+86-18101240246（ technician ）17611215338（salesman）

QQ:2820939878

Skype: simon541142052

Whasapp: +86 18101263250